Bombing Hiroshima and Nagasaki Essay Example | Topics and Well Written Essays - 1000 words

Bombing Hiroshima and Nagasaki - Essay Example The situation was similar to the initial years of World War II when Germany was annexing one country after another without any equitable resistance. Had not America dropped the two atomic bombs, in all likelihood, the war could have continued for weeks or months, adding to the miseries worldwide. Except for Russia, European powers had almost come to a standstill. The involvement of Russia in Japan had America not dropped the bombs, could easily have made the conflict bloodier and more widespread. It is debatable whether so many lives could have been lost had Russia invaded Japan. However, it is certain the conflict could have dragged on longer in such an eventuality. While other powers of the Axis viz, Germany and Italy had been vanquished, the battle with Japan was far from over. Japan was holding to ransom the rest of the world through its brazen show of power. Nothing seemed to hold the Japanese march. In spite of suffering reverses, Japan held on and was in no hurry to surrender. The Japanese juggernaut was so strong that it held most of Far East Asia. However, at the closing stage, Japan was losing its grip although it was not ready to admit defeat. Japan was given enough time and incentive to surrender. The Potsdam Proclamation issued on July 26, 1945, was very clear about the ramifications in the event of no surrender. The ultimatum declared, "We call upon the government of Japan to proclaim now the unconditional surrender of all Japanese armed forces, and to provide proper and adequate assurances of their good faith in such action. The alternative for Japan is prompt and utter destruction" (Bill Gordon, 2000). But Japan did not surrender. The Japanese, or those at the helm in Japan, were in no mood to listen. They may have been materially demolished, but mentally they had enough capacity to fight on. It took two atomic bombs and a week later, Japan surrendered and that too on the prompting of the emperor. I am not condoning the horrors of the atomic bombs. America had other alternatives besides the atomic bombs. But it is debatable if these alternatives could have worked and produced the same results that the atomic bombs did. The alternatives were these: "(1) use in manner most effective from a military point of view to bring about prompt Japanese surrender while minimizing the loss of American lives, (2) give military demonstration to Japan with opportunity for surrender before full use of weapon, (3) give experimental demonstration in this country with opportunity for surrender before full use of weapon, (4) do not use militarily but make public the experimental results, or (5) maintain as secret as possible and refrain from using the bombs in the war. President Truman chose alternative 1, even though only 15 percent of the scientists supported it" (Bill Gordon, 2000). President Truman's choice of alternative 1 was at best akin to mercy killing. However beastly this alternative might have appeared, it is difficult to fathom the efficacy of any other alternative. Japan needed a live demonstration. Even after the atomic bombs were dropped Japan dithered on the decision to surrender. It was only at the intervention of the Japanese

Someone Will Always Suffer Because of Conflict Essay Example for Free

Someone Will Always Suffer Because of Conflict Essay Someone Will Always Suffer Because of Conflict: Expository Practice SAC Conflict is inevitable, and constantly present in life. Whether it’s obvious and right in front of your face or hidden beneath a pile of lies someone will always suffer because of it. Although that being said, without it- would we truly understand the importance of peace? There are some out there who believe that some of the greatest triumphs and acts of the human spirit were during times of great conflict such as wars and repression’s. But I believe that these events have caused the most horrific demonstrations of human nature in the act of killing the innocent. In Arthur Miller’s tale of Witch hunts conducted in Salem during the 16th century in â€Å"The Crucible† he uses it as an allegory to show that sometimes the people who suffer the most during conflict actually are the most innocent. The story relates to a 1950’s America as Senator Joseph McCarthy would Blacklist innocent people for being â€Å"communists† due to little to no evidence and the person having a few opposing traits to him like being Liberal, Chinese, or speaking out against him. The public were okay with this of course, seeing how there was that much fear being spread and rumours of Russian communists taking over the country forced people to do whatever they could to save their â€Å"freedom†-even if they had spoken out against McCarthy for what he was doing, they probably would have been blacklisted themselves. This suffering relates back to the innocent people in Salem who refused to confess that they were Witches and were therefore jailed and some executed. The people who remained as not charged of being a witch still refused to speak out as they would be charged and persecuted also. More than one person suffered when it came to these conflicts, and it is sad to see how regard less that these two events in history were close to 400 years apart- human kind hadn’t changed, but instead repeated itself. If you were to look at any event in history where conflict was present you would definitely see suffering. During the holocaust the sufferers weren’t just the allies or Axis who lost their lives fighting- there were also the 6 million Jewish men, woman and even children who were slayed down as if they were sheep and gassed for being nothing more than them- selves. This wasn’t just suffering this was cruelty and an inhuman part of another greater conflict at the time. Also the suffering wasn’t over when the war finished either. It was at this time  after the war when Joseph McCarthy was placed as Senator and another whole decade of innocent people’s suffering began. Also prior to WWII when the conflict seemed to be â€Å"resolved† after World War I the great depression hit and even more people suffered due to it. The USA basically went into repression where and Americans found it ridiculously difficult to find work and make an income. In all these events in the 20th Century alone there were so many innocent sufferers because of a conflict that was greater than them, how can it be that there can be conflict without suffering? In the ongoing conflict of terrorism, one event stands out from the rest when it comes to the media, purely because of the severity and how big the statement of the crime committed was. In total, almost 3000 innocent people were killed in the September 11 attacks when two planes hit the World Stock Exchange in New York. These people were simply in the wrong place at the wrong time and due to a greater conflict between their government and the terrorist group Al Qaeda they were the victims. There were many wars and other conflicts that spread from this event which have led to the deaths of thousands of other innocent people-the question shouldn’t be â€Å"Will someone always suffer because of conflict† it should be â€Å"When will we stop suffering because of conflict†. Ultimately, it is clear that someone will always suffer because of conflict. Whether the conflict’s a war, a fight with your best friend or even your favourite team losing the grand final someone will always suffer because of it. But this does not matter. Because of suffering people will always try to overcome conflict and one day this world can have as minimal, unnecessary conflict as possible and people can work together to live in peace with one another.

Investigation of Argon Element

Investigation of Argon Element P1 Part 1 Atoms Poster The element selected from the periodic table for this investigation is Argon. Over this first section of the poster, we will be overlooking this particular element in detail.          Argon This element from the periodic table is known as a noble gas. It takes up one of the tiniest percentages (at 0.93%) of the earths atmosphere on a whole. It was discovered in 1894 by two chemists from the United Kingdom, who names are William Ramsay, and John William Strutt. This was accomplished as a result of fractionally distilling both oxygen and liquid nitrogen, therefore, having Argon released as one of its by-products. It was only completely isolated after the distillation process by examining the waste product from removing of nitrogen, oxygen, carbon dioxide, and water from the clean air. All the elements on the periodic table are represented by their own unique and individual symbol. Argon is an element on the periodic table represented by the symbol Ar. Also, Argon is displayed having an atomic number of 18; which displays to us that it has an amount of 18 protons located in the nucleus as well as the 18 electrons found on the atoms shells; is also displayed as having the atomic mass of 40; which is the number of protons and neutrons combines. As we already know it has a number of 18 protons from the atomic number we can then find out the number of neutrons by subtracting the atomic mass from the atomic number that equals to 22 neutrons. Additionally, by it being in group 0 it, therefore, has a clear classification of being a noble gas due to obtaining a full outer shell of 8 electrons. Due to this, it has the logical standard state of a colourless gas. By being a noble gas it has acquires special properties, primarily being that this non-metal is a very unreactive gas due to its complete electronic structure, not needing to gain or lose its outer shell electrons to other elements, not needing to achieve its already obtained electronic structure of a noble gas. Additionally, it is found in the third period on the periodic table due to it occupying 3 shells. Its electronic configuration has 2 electrons on the first shell and 8 each on the following two. Sub-atomic particles All atoms consist of the same subatomic particles. The table below displays the relative mass and charge of an electron, a proton and a neutron: Relative Mass Relative Charge Proton 1 +1 Neutron 1 0 Electron 1/1850 -1 As shown, protons and neutrons have the relative mass of 1 indicating that they are of equal size. Electrons are shown to have a relative mass of 1/1850 due to it being minuscule compared to protons and neutrons. Additionally, the relative charges are different to one another. Protons with a positive (+1) charge. Neutrons with no charge (0), and electrons with a (-1) charge. Section 1: The Periodic Table Group 1 Alkali metals Group 7 Halogens Group 2 Alkaline earth metals Group 8 Noble gases How are the elements in the periodic table arranged? There are different elements in the periodic table. These elements are categorised into separate sections. First of all, the metals (alkali /alkaline earth metals) are arranged on the left-hand of the periodic table. Alkalis in group one and then alkaline earth metals in the second. Next, the middle of the periodic table is where transition metals are found from scandiums group to coppers. Lastly for the metals, the poor metals that are found from zincs group to group six. Then follow the non-metals on the right-hand side starting from group to seven. Ultimately, group 0, consists of noble gases. There are then factors that create the periodic table layout. Firstly, the number of shells that occupy an atom correlates to which period number row that its in. in addition, the number of electrons in the outer shell of an atom is the same as the group column number in the table. However, for noble gases, theyre different to all atoms du e to having a full outer shell of electrons. This, therefore, categorises them in group 0. Electronegativity: In covalent bonds, electronegativity shows how strongly an atom attracts electrons. It increases as you go across a period in a table, therefore, the greatening the attraction for bonding electrons. Far left elements: These are atoms in the periodic table have only one or two electrons in their outer shells, concluding them in needing to give these away to achieve a full outer shell configuration. These have a low electronegativity due to being found on the far-left of the periodic table as the name suggests. Far-right elements: These are atoms in the periodic table that only need a few electrons to achieve a full outer shell, therefore having a strong desire to grab another atoms electron(s). These have a high electronegativity due to being found on the far-right of the periodic table as the name suggests. Ionisation Energy: Ionisation energy is simply the amount of energy needed to separate an electron from an atom to form an ion. Like electronegativity, the process of ionisation energy generally increases as you go across a period. Atomic Radius: The atomic radius consists of the length of the outer shell of an atom to the nucleus centre. Therefore, across periods on the periodic table, the atomic radius of the atoms decrease. This means that as you go along a period the distance between the outer shell and the nucleus decreases. Sodium 2, 8,1 Nitrogen 2, 5 Potassium 2, 8,8,1 Carbon 2, 4 Magnesium 2, 8, 2 Oxygen 2, 6 Calcium 2, 8, 8, 2 Chlorine 2,8,7 Neon 2, 8 Section 2: Bonding Elements form bonds to complete their outer shell to make them stable. There are two main types of bonding, ionic and covalent. We will be overlooking these two bonding types in this second section. Ionic bonding: Ionic bonding occurs between the positive metal ion and a negative non-metal ion compounds which attract and form an ionic bond by electrostatic attraction. The process begins with transferring an electron from a metal atom (far left element) to a non-metal atom (far right element). During ionic bonding, metal atoms lose their electrons to the non-metals which gain their electrons. A positive ion is formed when metals from groups one or two loose electrons to the far-right elements and then negative ions are formed when an atom in group six or seven gains electrons the electrons from those of the far-left elements. Covalent: This bonding process occurs in compounds of two non-metals. In a covalent bond, electron pairs occupy an area between overlapping atoms. This is to allow the sharing of electrons between the atoms in the compound which also allows for the structure to be held together and maintained. Covalent Molecules Name and formula Dot-cross diagram Water: H(2)O Methane: CH4 Hydrogen Chloride: HCl Chlorine: Cl2 Carbon dioxide CO2 Tetrahedral Basis of Organic Molecules Using the molecular models Ive drawn the structures of the following organic compounds and indicate their bond angles around the mid carbon atom. Organic Compound Structure including bond angles Methane (CH4) Ethane (C2H6) Propane (C3H8) Ionic Molecules Name and formula Dot-cross diagram Lithium chloride: (LiCl) Sodium oxide: (Na2O) Calcium chloride: (CaCl2) Aluminium oxide: (Al2O3) Bibliography http://www.ptable.com/Images/periodic%20table.png     Ã‚  

Allen Ginsberg Essay -- Biography Biographies Essays

Allen Ginsberg Allen Ginsberg "saw the best minds of his generation destroyed by madness" ("Howl"). He struggled through family conflicts and homosexuality throughout his adolescence, and then he went on to become one of the most read poets of his time. Allen was a strong man who never allowed anything get the best of him, including fear. He made a list of all his fears, large and small, and then worked his way through them, ridding himself of one fear after another (Mitchell 30). His influence on everyone he came in contact with carries on even after his death, and many writers dedicate their time to documenting his life as it affected them. Readers of his poetry say he has "a delicate lyrical style reminiscent of certain seventeenth century poets" (Brinnin 49). Allen Ginsberg, father of the beat generation, was the embodiment of the ideals of personal freedom, nonconformity, and the search for enlightenment. Irwin Allen Ginsberg was born on June 3, 1926 in Newark, New Jersey, and soon after moved to Paterson, New Jersey ("Modern American Poetry"). He was his parent's second child, preceded by one brother, Eugene, who was named after a speaker his father was impressed with as a young child (Miles 30). His father, Louis Ginsberg, was a high school teacher and a moderate Jew Socialist, and Naomi, his mother, was a "radical communist and irrepressible nudist who went tragically insane during early adulthood" ("Literary Kicks"). Naomi grew up speaking Yiddish and learned to play the mandolin when she was young. She went to Barringer high school, which is where she met Louis Ginsberg in 1912, when they were both only seventeen (Miles 12). Often Naomi, who also suffered through recurrent epileptic seizures and a severe form of... ...shes it. Works Cited "Allen Ginsberg." Literary Kicks. Feb 2002. http://www.charm.net/~brooklyn/people/allenginsberg.html. Brinnin, John Malcolm and Bill Read ed. Twentieth Century Poet: American and British (1900-1970). St. Louis: McGraw-Hill Book Co., 1970. Charters, Ann. "Allen Ginsberg's Life." Modern American Poets. Feb. 2002. http://www.english.uiuc.edu/maps/poets/g_1/ginsberg/life.htm. Ginsberg, Allen. "Howl." March 2000. http://www.charm.net/~brooklyn/poems/howl.html. Kramer, Jane. Allen Ginsberg in America. New York: Fromm International Pub., 1997. Miles, Barry. Ginsberg: A Biography. New York: Simon and Schuster, 1989. Mitchell, Adrian. "The Man Who Set Me on Fire." New Statesman April 1997: 30(2) Mitgang, Herbert. Dangerous Dossiers: Exposing the Secret War Against America's Greatest Authors. New York: D.I. Fine, 1988.

Advancement in Construction Technology Essay

1.1General Background Back in the day before there were computers the whole construction process was done by pen and paper from the bidding process to the actual drawings themselves. Since the innovation of the computer and interactive software these processes have gotten much more efficient. There have been many programs that ease the construction process. Such programs include, drawing software (AutoCad), spreadsheet software (Microsoft Excel), programs to assist with estimating (Plan Swift), planning and scheduling software (Microsoft Project), the internet as well as e-mail. There have always been minor updates on these programs but have mostly remained with the same basic purpose. Within the last 5 years a new state of the art program developed by AutoDesk using 3D Modeling has been integrated into many large jobs in Canada while in the USA it has been used regularly for about 10 years. This program is called Building Information Modeling and for short, BIM. There are many companies that do not know about BIM or have heard of it but have never used it or seen it being used. 1.2Specific Background The purpose of this report is to inform people within the construction industry about the available software and the importance of 3D modeling throughout the entire construction process. Hopefully this report will convince many people to incorporate BIM into their projects more often. Also, students should be learning about BIM in college programs and should also be an elective within high schools along with AutoCad. 1.3Thesis Statement Can 3D Modeling technology improve production control in the construction process? 1.4Explanation of Methodology Throughout this technical report, research on the rise of 3D Modeling will be analyzed and broken down to the reader through secondary research obtained from various online newspaper and magazine articles and academic articles recarding the subject. This research will be used to identify the need for 3D Modeling within the construction industry. It will then prove that the process behind 3D modeling will improve production from initial budgeting to maintaining the finished product. The primary research that will be used within this report will be presented through an online survey and face-to-face interviews with a number of industry professionals. The opinions and experiences of these professionals will be used within this report to support the presented question or establish background information regarding the subject. Each of the interviewees will be presented with the same set of questions in order to properly compare and compile the data received by them. 2.0Secondary Research Review 2.1Building Information Modeling: Safety Benefits & Opportunities, Professional Safety In this article Rajendran and Clarke argue the benefits of Building Information Modeling (BIM) in Health and Safety. They also mention several ways it helps with the overall construction process. The article starts of by defining BIM and its processes and Stating that it is becoming more popular within the architect, construction and engineering industries. They write that BIM allows builders to foresee any complications that may occur even before the construction process begins. They list major benefits BIM has regarding the construction process. There are many figures portraying how BIM can be used to assist with site layout and identify potential risks. Concluding this article they state that BIM had many benefits that can improve construction safety (Rajendran & Clarke, 2011). I will use parts of this article to argue the importance of BIM in the construction process. The major issue I am focussing on is how it will improve the construction process and prevent further complications. This article has some good points on benefits of using BIM regarding my topic. 2.2Implementation of Building Information Modeling (BIM) in Construction In this article Rowlinson, Collins, Tuuli and Jia, analyse the impirical impacts of Building Information Modeling (BIM) into construction. They review two cases where BIM was used successfully. In the first case the process started traditionally and after many issues causing delays, BIM was implemented and with the help of a BIM team they created the model and resolved the issues quickly. In the second case the BIM was implemented from the beginning and the process was much smoother and saved time. They find that BIM allows companies to deal with RFI’s (Requests for Information) much easier. Also, states that BIM allows builders to see conflicts between each parties system and resolve them before they clash on site and delays the project. On concluding this article, the authors find that success alone is not a sufficient driver for managers to justify implementing BIM (Rowlinson, Collins, Tuuli & Yunyan, 2010). I will use this article to strengthen my argument that the use of BIM will help with production control within the construction process. This article clearly outlines the issue I am trying to prove; BIM can make the construction process run smoother. This is a very important article to my research and has a lot of useable content. 2.3Building Information Modeling (BIM): Trends, Benefits, Risks, and Challenges for the AEC Industry. Leadership & Management In Engineering Azhar starts off this article by suggesting that building information modeling (BIM) has potential to reduce project costs and delivery as well as increase productivity. He states the building information model after construction is completed can be used for operation and maintenance. He then lists a number of applications of BIM such as, fabrication/shop drawings, estimating, sequencing and conflict detection. The results of two secondary source surveys says, 82% of BIM users believed that it had a positive impact on the company’s productivity, 79% of users indicate improved project outcomes and less RFIs. He then proceeds to report on 4 case studies illustrating cost and time savings. There are many data tables with different information, in one of them there is an analysis of different projects return on investment using BIM. He also states several potential risks and future complications related to BIM. On concluding this article Azhar suggests that the increasing use of BIM will likely enhance collaboration and reduce fragmentation in the industry (Azhar, 2010). I will use this article to help prove that BIM will help with the overall construction process including the start up. I will also use this back up the use of BIM to save money and make a considerable return. 2.4Construction industry goes high-tech In this magazine article the author Michael Douchette begins by introducing Autodesk which is the company that created AutoCAD and BIM. Both are industry revolutionary programs. He states that AutoCAD was a big step in the drafting works and BIM is quickly finding its way into being the industry standard. A primary source says that all stakeholders are able to interact on a 3D model (referring to BIM). Autodesk is working with institutions to make sure students are trained in the new (BIM) technology. He explains BIM allows designers, architects and engineers to identify deficiencies early in the process. Douchette then explains what Building Information Modelling (BIM) is. He says it’s not for only buildings or infrastructure. It is usable through the whole process of the project from Design through construction. Referring to a Smart Market Report he states that more than 70% of non-users think that competitors are using BIM. Everyone within the process will be using BIM. Trades workers will use a specific layer of the software and be able to make changes in real time. He concludes by stating, the future of construction is BIM (Doucette, 2012). I will use this to help improve my argument that it BIM is an aid to the construction process. This article has a lot of point referring to training new students to use BIM and in turn that proves that it is going to be a major part in the construction process in the near future.

US Should Ratify the UN Convention on the Rights of People with Disabilities

US Should Ratify the UN Convention on the Rights of People with Disabilities Introduction Disability is a condition that may arise naturally or during a persons lifetime. Different forms of disability exist, that is, physical or mental. A person with disability experience difficulties, often reflected when trying to interact with others or when performing certain tasks. Therefore, to support their well-being, and involve them in the decision making process, rules that respect their rights and freedom is important[1]. They will allow them access equal opportunities like other normal persons in the society.Advertising We will write a custom essay sample on US Should Ratify the UN Convention on the Rights of People with Disabilities specifically for you for only $16.05 $11/page Learn More The UN has recognized the importance of the disabled person’s rights and freedoms and has come up with the UN convention on the Rights of People with disabilities, CRPD and has urged member states to ratify it. This is a significant step which w ill help a disabled person lead a positive life. The CRPD has provisions which promote, prevent and protect the right of the disabled against violations. Many countries have ratified the CRPD since its inauguration, however, the US being a champion in advocating for the rights of the disabled persons around the world has not yet ratified the convention. It is on this note that the writer outlines compelling reasons why the US needs to ratify CRPD convention. Discussion US Troops and People Working abroad The US is involved in countless wars around the world in present times. The government is sending more and more troops in foreign countries such as Iraq and Afghanistan to protect and restore peace.[2] I salute this noble undertaking by the government. However, in their line of duty, we have seen many being maimed and facing other life changing injuries. I therefore urge the US to ratify the CRPD because the convention will help improve the welfare of the disabled troops returning f rom combats and other US citizens living and working abroad. This will reflect the US values of hope, opportunities and fairness around the world. Promoting Dignity and Inclusion In his own words, John McCain shows that the CRPD is clear in promoting the dignity, inclusion and independence of disabled people while defending their rights regardless of their origin[3]. I recommend the US to approve this convention because I view that every person has the basic rights which should be promoted, protected and stressed by the state. Right to Life Under the natural law, every person has an equal right to life. This right need to be protected and enhanced to allow a person’s participate effectively in the society. The CRPD promotes this fundamental right by supporting the rights of the marginalized, the country’s servicemen and women, and strengthening the dignity of all disabled persons. I therefore believe the US should ratify the CRPD to allow the disabled persons fulfill t heir basic right to live under the natural law.Advertising Looking for essay on government? Let's see if we can help you! Get your first paper with 15% OFF Learn More Complement the Americans Disabilities Act I urge the US to ratify the CRPD because it will complement the Americans Disabilities Act[4]. For a long time, the US has been relying on the Americans with Disabilities Act to champion for the rights and welfare of the disabled in the society. I believe by ratifying the CRPD, the US government will be complementing the Americans with disabilities Act by supporting equal access to opportunities and participation of all people with disabilities. US role in the World The US is vocal in championing for the rights of the disabled around the world. Its advocacy has not only been expressed in words, but, action as well. The US ideals are that the fundamental human rights should be upheld by all nations in the world. As a leader, I believe the US should lead b y example by ratifying this convention. This is because the convention will protect persons with disabilities and provide opportunities equal to others. Similarly, it will be a significant step in ensuring that all disabled persons are protected globally. Stigmatization The disabled persons are facing various challenges such as stigmatization. They are being denied their social, cultural, economic, political and civil rights.[5] I strongly believe that the CRPD will ensure the disabled person’s participation in education, politics and public life, employment and health is guaranteed. This is because the convention has an elaborate legal mechanism of preventing discrimination faced by these persons. A Warning to the World Various countries around the world have not taken bold steps in protecting the rights of the disabled.[6] Thus, they have strove to promote the practice of exclusion against them. I urge the US to ratify this convention because it will send a stern warning to countries where such practices persists[7]. Besides, it will inspire many states to ratify the convention thereby protecting the disabled persons worldwide. Not enforceable by US Courts Most US citizens fear the the US courts will enforce the CRPD or cause a change in the US laws. This is not the case, the Americans with Disabilities Act has already addressed this concern by granting disabled persons all the rights and freedom identified in the convention. Thus, the treaty will not require any changes in the US laws, besides, the convention will not require any cost in ratifying it. I therefore plead with US government to ratify this convention. Better Health Care Most disabled persons across the country face challenges when accessing health health care services. The fact that they have less financial resources make the matter even worse. Therefore, they are compelled to live with their frailty state.[8] The CRPD make it clear to the governments that they should ensure all persons with disability conditions access affordable health care whenever possible. I urge the US government to speed up and ratify this convention. The convention will make it easier for the disabled persons to access affordable health care and eventually improve their health.Advertising We will write a custom essay sample on US Should Ratify the UN Convention on the Rights of People with Disabilities specifically for you for only $16.05 $11/page Learn More Address Major Concerns The US is experiencing disability concerns in sectors such as education, health care and housing. These concerns have been addressed in the convention. By ratifying the convention, the US will not encounter any concerns involving the disabled persons on aforementioned concerns. I therefore urge the US to counter these concerns by ratifying the CRPD. Appreciate Culture Diversity By being a multicultural country, the people with disabilities in the US comprises of different races, ethnicity , sexual orientation and age.[9] All these groups contribute to the cultural uniqueness of the US. Thus, I urge the US to ratify the CRPD because it will contribute to preserving the uniqueness of the country, besides, it will promote their rights. Conclusion The CRPD is a significant regulation that US should ratify. The convention will provide unlimited rights and freedoms to the disabled persons. Though the US has made significant strides in guaranteeing rights and freedom to disabled persons through Acts such as the American with Disabilities Act, most Americans remain poor, under-educated and under-employed. Lack of accessibility and equality among the disabled persons has been cited as the cause of these concerns. Thus, the US government should move with speed to ratify the CRPD. The convention will allow the disabled persons equal access to opportunities, guaranteed of their rights and get involved in the growth of the US. Similarly, by ratifying the treaty, the US will be fo stering the culture of inclusion, independence and fairness of opportunities among the disabled people. Bibliography Equality and Human Rights Commission. â€Å"Convention On The Rights Of Persons With Disabilities.† Creating a Fairer Britain. Web. McCain John. â€Å"Bipartisan Group Of Senator’s Announce Support For Disability Treaty.† Press Releases. Web. The White House. â€Å"Remarks By The President On Signing Of U.N. Convention On The Rights Of Persons With Disabilities Proclamation.† The White House. Web.Advertising Looking for essay on government? Let's see if we can help you! Get your first paper with 15% OFF Learn More UN. â€Å"Convention On The Rights Of Persons With Disabilities.† Preamble. Web. Footnotes John Mccain, â€Å"Bipartisan Group Of Senator’s Announce Support For Disability Treaty.† Press Releases. John Mccain, â€Å"Bipartisan Group Of Senator’s Announce Support For Disability Treaty.† Press Releases. John Mccain, â€Å"Bipartisan Group Of Senator’s Announce Support For Disability Treaty.† Press Releases. John Mccain, â€Å"Bipartisan Group Of Senator’s Announce Support For Disability Treaty.† Press Releases. UN, â€Å"Convention On The Rights Of Persons With Disabilities.† Preamble. The White House, â€Å"Remarks By The President On Signing Of U.N. Convention On The Rights Of Persons With Disabilities Proclamation,† The White House. UN, â€Å"Convention On The Rights Of Persons With Disabilities.† Preamble. Equality and Human Rights Commission, â€Å"Convention On The Rights Of Persons With Disabi lities.† Creating a Fairer Britain. Equality and Human Rights Commission, â€Å"Convention On The Rights Of Persons With Disabilities.† Creating a Fairer Britain.